Teflono develops premium PTFE-based mechanical greases that thrive where conventional products fail, from 300°C thermal processing to saltwater marine environments.
Teflono is organized around two application families: red-coded high-temperature products for furnaces and industrial heat, and blue-coded marine/outdoor products for water, salt and corrosion exposure.
ThermoMax, TitanHeat and MagmaForce target sustained thermal service from 260°C to 300°C with PFPE, fluorosilicone, PTFE and high-stability thickener systems.
HydroForce, AquaShield and MarineGuard target saltwater, submersion, spray-zone and outdoor equipment with calcium sulfonate or aluminum complex moisture barriers.
These products are designed for ovens, kilns, steel mills, foundries and thermal processing machinery where standard greases oxidize, drip or lose film strength.
PAO/PFPE co-base grease for industrial ovens, kiln car bearings and furnace conveyor systems.
PFPE/PTFE grease for steel mills, cement kilns and high-load hot-section bearings.
Fluorosilicone/PTFE-boron nitride grease for foundry, glass and extreme thermal equipment.
Marine/Outdoor products focus on adhesion, washout resistance, corrosion control and reliable low-friction films in exposed or submerged conditions.
Calcium sulfonate complex PTFE grease for deck winches, rudder bearings and port handling equipment.
Synthetic ester PTFE barrier grease for submerged valves, tidal turbines and splash-zone mechanisms.
Professional shipboard and offshore grease for engine-room bearings, mooring winches and deck pins.
The concept targets higher PTFE loading, stronger water resistance and higher thermal margins than common industrial and marine grease references.
| Metric | Teflono high-temp | Typical premium industrial | Teflono marine | Typical marine grease |
|---|---|---|---|---|
| Max service temperature | 295-300°C | 120-290°C | 180°C | 130-177°C |
| PTFE content | 20-25% | 0% or PFPE/PTFE specialty only | 15-20% | Usually 0% |
| Drop point | >325°C | 185-320°C | 305-310°C | 200-300°C |
| Wear scar target | 0.32-0.38 mm | 0.40-0.65 mm | 0.42-0.45 mm | 0.50-0.60 mm |
| Water resistance | Very good | Moderate to good | Superior | Good to excellent |
| Best-fit use | Furnaces, kilns, foundries | Standard bearings | Saltwater, submersion, offshore | General marine maintenance |
Polytetrafluoroethylene is a fluoropolymer with low friction, chemical inertness, water repellency and thermal stability. Teflono uses it as a dispersed solid lubricant inside engineered grease matrices.
PTFE maintains useful structure across extreme temperatures; grease performance then depends on base oils, thickeners and additive stability.
PTFE boundary films reduce metal-to-metal contact and target friction coefficients near 0.04 in well-dispersed formulations.
Strong carbon-fluorine bonds give PTFE high resistance to acids, bases, solvents and saltwater exposure.
PTFE and hydrophobic silica help create moisture barriers that reduce washout and corrosion pathways.
PTFE has the repeating formula (C2F4)n. Its carbon-fluorine bond strength is the reason it remains one of the most important industrial polymers for harsh-environment lubrication, sealing and coatings.
Target users include thermal-process operators, steel and cement plants, glass manufacturers, shipyards, ports, offshore platforms, water treatment plants and outdoor heavy equipment fleets.
Oven chains, kiln car wheels, furnace conveyor systems, industrial dryers, foundry tooling and glass manufacturing lehrs.
Rolling mill bearings, rotary kiln seals, hot-section fan bearings, crane slewing rings and shock-loaded industrial guides.
Deck winches, rudder bearings, propeller shaft seals, tidal turbine bearings, lock gates and offshore crane mechanisms.